Gigabyte GA-970A-UD3P Instrukcja Użytkownika Pobierz pdf (Strona 15)

- 15 -

Hardware Installation

1-3-2 Installing the CPU Cooler

FollowthestepsbelowtocorrectlyinstalltheCPUcooleronthemotherboard.(Thefollowingprocedureuses

theGIGABYTEcoolerastheexample.)

Use extreme care when removing the CPU cooler because the thermal grease/tape between the CPU

cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

Step 1:

Apply an even and thin layer of thermal grease on

the surface of the installed CPU.

Step 2:

Hook the CPU cooler clip to the mounting lug on

one side of the retention frame. On the other side,

push straight down on the CPU cooler clip to hook

it to the mounting lug on the retention frame.

Step 3:

Turn the cam handle from the left side to the

rightside (as thepicture above shows)to lock

intoplace.(RefertoyourCPUcoolerinstallation

manualforinstructionsoninstallingthecooler.)

Step 4:

Finally, attach the power connector of the CPU

coolertotheCPUfanheader(CPU_FAN)onthe

motherboard.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

Brak uwag

Gigabyte GA-970A-UD3P Instrukcja Użytkownika Strona 15